README.approx: update documentation

[xodist] / README

diff --git a/README b/README
index 843d3c145c82159f4227431461aa2bc3e000328e..aaa04610bd6057dd049b1b2705ae8acf165e7f0e 100644 (file)
--- a/README
+++ b/README
@@ -5,7 +5,7 @@ firmware support unlike an ordinary PC.  The usual Debian boot CDs do
 not work, yet.  xodist builds a Debian system image in the format
 required by the firmware.
 
 not work, yet.  xodist builds a Debian system image in the format
 required by the firmware.
 

-See *.packages for other image flavours, and change "kde" below to the
+See configs/* for other image flavours, and change "kde" below to the

 flavour.  See README.approx before starting if you would like to cache
 the packages downloaded.
 
 flavour.  See README.approx before starting if you would like to cache
 the packages downloaded.
 


@@ -13,15 +13,15 @@ How to use xodist to generate a Debian KDE image for an OLPC XO:
 
 1.  build the root filesystem,
 
 
 1.  build the root filesystem,
 

-       sudo ./initchroot.sh --package-list kde.packages kde.root
+       sudo ./mkchroot.sh --config-type debxo-kde debxo-kde.root

 
 2.  make the JFFS2 filesystem,
 
 
 2.  make the JFFS2 filesystem,
 

-       sudo ./mkjffs2.sh kde.root kde.img
+       sudo ./mkjffs2.sh --config-type debxo-kde debxo-kde.root debxo-kde.img

 
 3.  copy the files to a thumb drive,
 
 
 3.  copy the files to a thumb drive,
 

-       sudo ./mkbootable.sh --output /mnt kde
+       sudo ./mkbootable.sh --output /mnt debxo-kde

 
 4.  ensure the XO is unlocked, by obtaining a Developer Key, and using
 the OpenFirmware command,
 
 4.  ensure the XO is unlocked, by obtaining a Developer Key, and using
 the OpenFirmware command,


@@ -32,8 +32,8 @@ the OpenFirmware command,
 
 6.  insert the thumb drive,
 
 
 6.  insert the thumb drive,
 

-7.  power up, when prompted press Enter, and the image will be copied
-to the NAND flash, and then booted,
+7.  power up, answer the prompt, and the image will be copied to the
+NAND flash, and then booted,

 
 Warning: this erases everything on the XO, including any Developer
 Key, but if you have followed step 4 above that should not matter so
 
 Warning: this erases everything on the XO, including any Developer
 Key, but if you have followed step 4 above that should not matter so


@@ -41,4 +41,6 @@ much.
 
 8.  remove the thumb drive before the next reboot or power up.
 
 
 8.  remove the thumb drive before the next reboot or power up.
 

-Note: Firmware Q2E14 or newer is required.
+Note: Firmware Q2E20 or newer is required. The jffs2 images are for
+installation on NAND (the onboard flash), the ext3 images are only for
+usbsticks and sd-cards.